spiggytech 28mm Wrench for Matrix Spitfire Tracer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are simple wrenches for loosening and tightening the tracer unit bodies
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
For use with the Evike Spitfire 28mm Tracer
I noticed that some come out of the box very tight and difficult to unthread. This handy tool is so you can unthread the endcap without using pliers, clamps, or vices which can mess up the tracer unit or the finish. It is also handy for affixing or removing the device from your airsoft.
Print Logo Side Up, supports for the screw holes if you want. Ironing for top surface if you want it to look nice.
I recommend +4 wall, 15% Gyroid, PETG+ or Stronger material. Tested with ASA.
BOM:
4x M3*20mm Screws & 4x M3 nuts from this kit
(optional, but super helpful) 4x 3mm x 12mm pins from this kit