Mallet-Winding-Machine / Schlegel-Wickelmaschine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Winding machine for vibraphone and marimbaphone mallets.
- Ocena
- 4,75 / 5
- Polubienia
- 73
- Pobrania
- 1779
- Wydruki
- 5
- Wyświetlenia
- 6534
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The mallet winding machine was developed and built for me by Mr. Fabian Buschulte as part of a student project at Reutlingen University. Apart from a few roller bearings, thread inserts and screws, as well as the purchased counter, it consists exclusively of 3D printed components made of PETG, which can be produced very easily on any commercially available 3D printer without support material. The yarn tension is adjustable and head diameters of up to 60 mm are possible. Rods up to a maximum diameter of 11 mm can be clamped by using different clamping tongs. Two different filament materials can also be used simultaneously.
Update June 2026: The following video shows one way to get the purchase parts you need in the U.S. I don't know if McMaster is particularly cheap or expensive, but you can get all the parts you need there.
You just need to search for the digital electrical counter on Amazon.