Microphone Echo Shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protect your microphone signal from part of the echo of the room.
- Ocena
- 0 / 5
- Polubienia
- 69
- Pobrania
- 273
- Wydruki
- 0
- Wyświetlenia
- 2462
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
Protect your microphone signal from part of the echo of the room.
Print :
- 2xSidePanel
- 1xFrontPanel
- 1xMicrophoneHolder
Buy :
- 4xM4 10mm screw
- 4xM4 self-locking nuts
- 3x25x25cm soundproof panels
I printed the panels on their round side, with support enabled.
Assemble the panels with 10mm M4 screws and self-locking nuts.
The holes in the MicrophoneHolder piece are designed to have standard 5/8" threads. If you don't have a proper 5/8" tap, you can do as I did, and use your microphone stand as a tap to create the threads. If using PLA, the plastic is soft enough for this to work.
For the sound proof material, I used 25x25cm panels from Aliexpress : http://a.aliexpress.com/_vKiKO8
Cut 173x157mm rectangles in the panels and it will fit right into the panels, no need to glue them. (You need to make a groove in the sound proof material for the center panel).