KLIPPT - Skadis Mounting Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bring the KLIPPT cable clip system to your SKADIS Pegboards with the help of the Skadis Universal Slot Nut System.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 523
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
An alternative base for the KLIPPT cable clip system that allows mounting on a SKADIS pegboard. The solution that uses keyed slots that are for my Skadis Universal Slot Nut System (will add link when published).
The hook and the base plate are printed separately and assembled so that optimal print orientation can be achieved.
Assembly
You can either glue the SNS_Hook_Blank to the klippt-base-skadis with superglue. Or attach the SNS_Hook_Screw to the klippt-base-skadis-hole with 16mm M3 countersunk Machine Screws.
The keyed slot help with increasing glue area and preventing twisting.
Both options work fine but the screws give more options of mounting (in development)
Installation
The Hook will go in at an angle and then you can push down so it is flush with the pegboard surface. Then pull the hook down to engage the smaller bottom hook.
