Cover for LG Ultragear monitor foot attachment point
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover for a 27GN800-B monitor foot attachment point.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 301
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a cover for a LG 27GN800-B monitor foot attachment point, probably works on a few other LG monitors as well. The mounting system for the monitor leaves a metal attachment point when you use a vesa mount. This seemed like an easy enough challange for a first model so i designed a small shroud to hide the metal and store the screws for attaching the monitors foot.
The model prints great on my neptune 3 pro, no supports needed, standing on the non angled surface. I used 2 wall layers, 0,2mm layer height 15% infill but i suspect you can get away with less.
Takes about 9g of filament, i used PLA, came out pretty well.
The tolerances on the screws are pretty tight.