Soldering aid - clamp with magnetic base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This soldering aid serves as a clamp for cables and electronic components.
- Ocena
- 4,867 / 5
- Polubienia
- 1745
- Pobrania
- 1908
- Wydruki
- 19
- Wyświetlenia
- 16 224
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This clamp makes it easier to solder cables and other electronic components. It is the perfect addition to the soldering station and the articulated arm.
The base plate of the soldering station is a 1.5 mm thick sheet steel. Therefore, all soldering aids have a magnetic base.
There are spaces for cables and LEDs in the clamping area.
Print Settings and Assembly:
Parts:
The disc magnet is a neodymium magnet Ø 8.0 x 3.0 mm.
The spring is a clothespin spring.
Here you can find the TPU_Base_Plate.
Print Settings:
Material: PETG and Ninjaflex TPU
The TPU_Base_Plate should be printed from TPU, for the other two parts i used PETG.
Support: Yes on the Base Clamp, but you should use the paint-on function.
Assembly:
The spring should first be inserted into the movable part, then it can be easily put into the other part.