Parametric clothes pegs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If your clothes peg bag is full of half pegs and springs, this model is for you. Make custom peg parts with OpenSCAD.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If your clothes peg bag is full of half pegs and springs, this model is for you. Print replacement peg halves to match half-pegs and springs that you find.
How to use:
- Measure your existing spring and/or peg half according to the dimensions photo.
- Open peg.scad and modify the parameters at the top of the file
- Print!
If you need both halves of the peg, print the model twice - they're symmetrical.
The STL files supplied probably won't fit your springs - they all seem to be different. But in case they do, they're named as follows:
Peg-A-B-C.stl where:
A=springCoilDia
B=springLengthOverall
C=springWidthOverall
The other dimensions are not critical for fitting the spring, but if you're trying to match an existing peg half you'll probably want to modify more of the parameters.