Parametric clothes pegs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If your clothes peg bag is full of half pegs and springs, this model is for you. Make custom peg parts with OpenSCAD.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 99
- Makes
- 0
- Views
- 376
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If your clothes peg bag is full of half pegs and springs, this model is for you. Print replacement peg halves to match half-pegs and springs that you find.
How to use:
- Measure your existing spring and/or peg half according to the dimensions photo.
- Open peg.scad and modify the parameters at the top of the file
- Print!
If you need both halves of the peg, print the model twice - they're symmetrical.
The STL files supplied probably won't fit your springs - they all seem to be different. But in case they do, they're named as follows:
Peg-A-B-C.stl where:
A=springCoilDia
B=springLengthOverall
C=springWidthOverall
The other dimensions are not critical for fitting the spring, but if you're trying to match an existing peg half you'll probably want to modify more of the parameters.