1 / 6
HSW Gyroscopic Screwdriver & Battery Holders
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holders of both the DeWalt 8V Gyroscopic Screwdriver (DCF680) & Batteries (DCB080) for the Honeycomb Storage Wall.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
Modeled holders compatible with RostaP's Honeycomb Storage Wall (HSW) System and utilizes their “Insert M4.stl” File, please go to his page and download his file here.
These two models were designed to have a tight fit around the tool and batteries.
- The Tool holder was designed to click in directly to the HSW. Designed also so that if the tool's bit holder attachment is used the tool with attachment will fit and not contact the wall along with a hole in the bottom to leave a bit inside the tool.
- Printed with PLA+ w/ 20% Infill and Supports Required.
- The Battery holder is the model that requires the M4 Insert from RostaP as previously mentioned, this also allows for the holder to be rotated to accommodate the users preference; obviously a M4 bolt and nut will be required. The battery will protrude straight from the HSW but will latch into the holder to avoid falling out.
- Printed with PLA+ w/ 20% Infill and No Supports.
I included the original STEP files I used to create this for tweaking if anyone would like to.
Cheers and good luck printing
-Cave