Bauer Battery Charger Wall Mount Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mountable base plate for the 1704C-B charger that comes in the drill/charger/battery combo pack.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 308
- Wydruki
- 4
- Wyświetlenia
- 1228
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Simple replacement base for the 1.7A Bauer battery charger that comes with the drill/charger/battery combo. Adds the ability to wall mount. I matched the contours enough to have it snap together. I didn't bother transferring the vent holes in the base since there are holes in the top.
Printed in Polymaker Red ASA, which matches the factory color pretty well. There is a chamfer in the slot, making bridging easier and supports not necessary. This was a tricky print in ASA, requiring glue stick and about 4 added discs per side. PLA didn't have much of an issue while prototyping.
Fusion file included in case anyone needs to make modifications. No promises the constraints are set up properly, this was a learning experience :D