Wyniki wyszukiwania: bauer

Bauer Battery Wall Mount

Mount 2 Harbor Freight Bauer 20v batteries to the wall

Milwaukee M18 Battery To Harbor Freight Bauer 20V Tools Adapter

v3.1 update, 11-April-2024: Finally got to borrow a Bauer 20V battery to take measurements from, and have revamped the design for best fit. Earlier iterations were functional, but this now fits all the Bauer tools I have to test with just…

Bauer Angled Battery Mount

This is a simple remix of an existing bauer battery holder, which I've used for storing batteries on the undersides of shelves, but for wall mounting, vertical clearance became an issue when removing the batteries. Angling the batteries…

Bauer 20V battery power tap

This is a power tap for using a Bauer 20V battery to power other devices. Printing and assembly instructions included in the files. Always exercise caution when working with wiring and lithium batteries. They will discharge very fast if…

Harbor Freight Bauer Modular Organizer Storage Bins

These bins increase the amount of storage compartments in the Harbor Freight Bauer Modular Storage System. The storage box only comes with 12 rather large bins, and putting a small quantity of small hardware seemed like a waste. These…

Erbauer / Skil - Battery 18V holder

Witajcie! Przedstawiam uchwyt na baterie 18V firmy Erbauer oraz Skil! Pozdrawiam!

Harbor Freight 20v Bauer battery charger (early version) wall mount

You will need some longer 3mm x 20mm length screws to make this work. The original screws are Torx T10 security heads. Luckily Harbor Freight sells a set of security bits needed to remove them.

Bauer Battery Charger Wall Mount Base

Simple replacement base for the 1.7A Bauer battery charger that comes with the drill/charger/battery combo. Adds the ability to wall mount. I matched the contours enough to have it snap together. I didn't bother transferring the vent…

bauer hockey rex

Bauer Battery Charger Mount

I wanted to mount by Bauer Battery Chargers to a French Cleat in my shop. There is another mount available but you need to get specific screws. I had difficulty finding them so I designed a simple box/case/mount. It uses more filament…

Rosenbauer Panther 6x6 Fire Truck kit card

Printing/Building Print with 0.1mm layer height, insert color changes at 1mm and 1.5mm (Black layer is 1mm thick, white and red 0.5mm each) Had to make the joints quite small to fit in the DIN A6 Postcard format so a bit of superglue…

Bauer 20V Blower Wall Mount

STEP file included, licensed as public domain, do what you like, I don't care. You will need: 2-m4x20 2-m4 nuts to clamp the tool side on

Harbor Freight Bauer 20V battery holders

Battery holders for the 20V Bauer batteries sold at Harbor Freight. I only have the 1.5 and 3Ah batteries, so could only make models for them, and not the 5Ah one. Holder has 2x#8 countersunk holes for mounting. I have only tested the…

Bauer Tool Mount

Bauer Tool Mount designed in Tinker CAD. No supports/rafts needed.

Bauer Hockey Helmet Sliding Buckle

My sons Sliding Buckle for his Bauer Hockey Helmet broke and I didn't want to pay $1.99 + $7.99 shipping to replace it. In order for this to work properly you need to feed the band back through the first opening of the buckle to get a…

Bauer 20V Tool Mount

Bauer 20V Tool Mount – Wall Organizer Bracket Keep your Bauer 20V power tools secure and organized with this heavy-duty wall mount. Designed specifically to fit the Bauer 20V battery interface, this bracket holds your tools securely with…

Bauer 20V Drill Wall Mount

STEP file included, licensed as public domain, do what you like, I don't care.

Erbauer / Skil - Tool holder 18V

Witajcie! Przedstawiam uchwyt na elektronarzędzia 18V marki Erbauer oraz Skil. Pozdrawiam!

Bauer Rolling Tool Box Faceplates

Replace the “BAUER” logo on your Harbor Freight modular rolling tool boxes with a blast from the past! Based off of the tool brand from the show “Home Improvement”, these Binford logos will class up your rolling toolbox! I've also…

Dewalt Battery to Bauer Tool Adapter

UPDATE: 12/27/25 As i aquire more bauer tools i am continuing to tweak the model so that the adapter fits every tools universally. i dont own any bauer batteries so i tweak it as i go. i just updated the latest version of the model. so if…

Erbauer battery holder fast print lite version

Erbauer battery holder fast print lite version.

Universal Milwaukee M18 & DeWalt V20 Tool Holder – Slim, Stealth, and One-Sided Mount – Also Fits Bauer & Hercules

Keep your cordless tools organized, secure, and ready for action with this ultra-slim, one-sided tool holder designed to fit Milwaukee M18 and DeWalt V20 power tools, as well as Bauer and Hercules (Harbor Freight) cordless tools that use…

Strap clip for Bauer Helmet

Spare strap clip for Bauer RE-AKT ice hockey helmet. Printed with PETG. Needs a bit of support for printing

Vacuum Coupler/Adapter for Bauer 2.8amp 5in Palm Sander

The coupler allows you to remove the dust box and attach a 1-7/8" shop vacuum hose. I use this one and I love it! You may have to sand down the inside of smaller part of the coupler to get an easier fit. Here's a link to the exact sander…

Mittelalter Bauernfamilie/Medieval farming family

.

Bauer 20v Battery Cover (Harbor Freight)

I recently purchased some tools from Harbor Freight that use a Bauer lithium battery. There are no covers for the contacts of the spare batteries so I design one. You don't want one of these shorting out and starting a fire. The first…

Bauer 20v tool hanger

I wanted a tool hanger that hung Bauer 20v tools upside down and couldn't find on. So I created this. This works great for the storage/transport box that I wanted to put them in. No supports needed. I printed in Petg and its plenty strong.

24 Bauer Mask

Any one who enjoyed the series 24 will love this mask, Cheers Jace

Bauer Battery Adapter

Blue crimp spade connectors fit snugly when not crimped. Suggest soldering wires to the connectors to maintain fit. This was a remix of another model but I'm unable to locate the original post. The original was slightly modified to create…

Vacuum Hose Adapter for Harbor Freight (Bauer) Belt Sander

This is a simple vacuum hose adapter to make it possible to connect an approximately 30mm (tapered) vacuum hose fitting to a 2-½" O.D. diameter opening - this is the opening on the Bauer sander as shown in the photos (and probably sold…

Bauer 20V Grinder Wall Mount

STEP file included, licensed as public domain, do what you like, I don't care.

Bauer vacuum attachment

Made with PLA+, OC used PETg so both should work no supports You want max adhesion so rafts or your slicer equivalent will help. Infill shouldn't make much difference, I used 20% This is a tall model- almost 240mm so make sure your…

Bauer 20V String Trimmer Wall Mount

STEP file included, licensed as public domain, do what you like, I don't care.

BAUER 20V Cordless Blower - Short Attachment

This is an attachment for the Bauer 20v Blower that is less than half the length of the original. It's 10cm long with an 18mm exhaust diameter. I printed in PETG but I'm sure anything would work. It fit snuggly for me off my Prusa MK4. I…

Bauer Gridfinity Inserts

Simply print all 4 sections and slide them together inside the unit. You can glue them together if you'd like but the dovetail and engagement on the interior features of the box does a pretty good job. The space inside the box is 15u tall…

Work light for WORX/Erbauer/JCB/Titan/Guild 18V battery

BOM: 1S-8S battery indicator 1 “60W” lamp 1 SPST 15x10mm switch 2 6.3 mm wide, long spade connector, I've used angled PCB spade connectors. 2 6x12 mm screws optional if low battery voltage cutoff is needed, I used TL431 low voltage…

Bauer Sander vacuum Adapter

Easy install. Replace filter with adapter and connect hose. Print with Fuzzy skin for better Grip.

Harbor Freight / Bauer Dust cyclone separator lower flange

Simple flange to reinforce the bottom of the Bauer dust separator sold by Harbor Freight

HF Brand Logos #2 (Bauer, Hercules, Icon)

Logos for Harbor Freight brands: Icon Hercules Bauer Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you're looking for a particular logo, let me know and I'll try and get it for you.

20V Bauer Battery Adapter with 2020 extrusion mounting

Originally for my 3D printer backpack, this adapter can be useful for anyone that will be using it to power other devices (Power Wheels, Motors, USB devices with buck converters). !!!LITHIUM BATTERIES WILL CAUSE A FIRE IF MISHANDLED OR…

Bauer 20V Blower Wall Mount Remix

The Bauer 20v Blower is a great product, but the keyhole cutout for storing it on a screw or nails is not ideal. I found the Printables model by BenK that fits the blower perfect but the wall mount does not work for attaching it to the…

Chop jig for a Harbor Freight Bauer 4-1/2” corded grinder.

I am very pressed for space living in a small apartment with no garage. All my tools are kept in my small spare room closet. Any jigs, sawhorses, etc, must be able to fold/break down for storage. When I needed to cut some threaded rod, I…

Bauer 20v Charger Wall Mount

Wall Mount for Bauer 20v charger. Can be attached to charger with screws or foam mounting tape.

24 - Jack Bauer - 2001

24 - Jack Bauer (Kiefer Sutherland) - 2001 3D printable model.

Bauer battery block to hold tools

I took measurements from a Bauer Li-Ion battery and I use this to hold my battery powered vacuum on the wall and out of the way. Someone more ambitious may use this as a start to a battery adapter - I have done the “Bauer" side of things…

Mount for BAUER 4v Lithium-Ion 1/4 In. Cordless Screwdriver

I wanted a under shelf mount for my Cordless Screwdriver (harbor freight 64313 https://www.harborfreight.com/4v-lithium-ion-14-in-cordless-screwdriver-kit-64313.html ) So I took a profile pic of the screwdriver on graph paper, traced it…

BAUER 20V Brushless Cordless Variable Speed Compact Router base

Replacement base for Baurer 20v router

Erbauer ER2100 Router skid plate

This is a replacement plate for the bottom of the router. Can also be a starting point for other mods like a track sled for the router. I recommend printing in PETG for rigidity.

Micro-Cleaning Accessory Holder (For Harbor Freight Bauer Set)

Designed for: Bauer “Micro-Cleaning Accessory Kit for Wet/Dry Vacuums, 9-Piece” by Harbor Freight. https://www.harborfreight.com/micro-cleaning-accessory-kit-for-wetdry-vacuums-9-piece-59695.html Smaller pieces are a 17mm diameter hole.…

Bauer NME4 Goalie Helmet Clip

fits with bauer NME4 SR. For best print use: PC or PETG with 80% fill, automatic supports

Harbor Freight Bauer Modular Organizer Storage Bins 1/4 Size

Remix of Harbor Freight Bauer Modular Organizer Storage Bins by @Lunchie_B_1131947 to further subdivide bins into 4

Ridgid NXT 2.5" to Harbor Freight/Bauer corded Random Orbital Sander dust port

Ridgid NXT 2.5" (nominal) vacuum hose to Bauer/Harbor Freight corded Random Orbital Sander dust port adapter. Print Settings Rafts: No Supports: No **Resolution:** .2mm Infill: 15% gyroid **Filament:** Geeetech TPU 95A Black Notes:…

HSW - Bauer rotary tool holder + bit storage case

This is a storage attachment for the Honeycomb Storage Wall to fit a Bauer cordless rotary tool from Harbor Freight ( this one specifically). I'm also including a print file for an attachment to hold the storage box it came with for the…

Bauer Cordless 20v mini shop blower wall mount

I needed a way to store my mini blower in my RV to keep it safe and off the compartment floor, so I designed this very robust wall mounted holder to mount it, along with two extra nozzle storage pods. It needs to be rotated in the slicer…

Trigger Lock for Bauer Bandsaw

This is intended to be used while the saw is mounted to a table in the vertical position. Check out the video. Printed upside-down with support. Use a brim on the shaft. The hinge takes an 8-32 machine screw. It was designed to use a…

Bauer Drill or Impact Bit Holder

A bit holder for Bauer cordless tools. This holder fits the right side of the tool, print this in a mirror image to fit the left side. Install using an M4x10 cap screw.

Bauer Full Face Visor adapted clips for CCM Helmets

I purchased two Hockey CCM Helmets in a end-off-life offer, but actually, the Full Face Visors I have are from Bauer. The holes for the clips in the CCM helmet are 11mm wider than in Bauer helmet and I designed this clip variant to avoid…

Bauer ice Hockey Skates Runners storage case

This case is used to store Bauer Hockey Skates runners. It can also be used for other models of runners like CCM, although True's runners won't fit. Checkout my other models for the TRUE model.

Big Zombie Remix - rebased and hollowed for resin printing - original by Schlossbauer

All credit to Schlossbauer for the original model - follow the links to his orignal model and support him on patreon if you can. I'm uploading this remix as I found myself spending a significant amount of time reworking the model both to…

Parametric nozzle for high-volume inflators (Ryobi, Bauer, Coleman, Makita etc)

This is an attempt to create a parametric (customizable) OpenSCAD nozzle for the Ryobi high-volume low-pressure inflator that can be adjusted to work with a particular inflatable. The tip that comes with Ryobi is about 7mm, while most of…

Bauer Modular Storage Level Holder

I used this to have a specific place for my level when I go to the field. I used four screws from my random hardware bin. Due to where I wanted the holder, I trimmed a small part of the ribbing on the side of the carrier although these…

Bauer Drill Magnet Holder

Mount for a Bauer drill that uses a nametag magnet and fits with friction alone. This can be used to hold metal objects hands free while using the drill. This works with most Bauer 20v battery powered tools. This is the nametag magnets…

Kia, Hyundai Logo Nameplates for Bauer Harbor Freight Large Modular Toolbox EV6/Ioniq 5 Frunk Replacement

A few US owners have hacked their RWD Kia EV6 and Hyundai Ioniq 5 frunks by replacing the small OEM compartment with a roomier Harbor Freight Bauer Modular Toolbox. The Bauer nameplate on this toolbox can be popped out with a screwdriver,…

Bauer 16 Gallon vac to Bauer Drywall sander adapter

Included freecad file so it can be modified and used as needed.

Bauer Wet/Dry Vacuum to Corner/Detail Sander Adapter

Adapter to connect a Bauer Wet/Dry Vacuum to a Bauer Corner/Detail Sander

Erbauer 18v CIrcular Saw Mount

Wall Mount for Erbauer ECS18-Li Circular Saw This is a simple but sturdy wall mount designed specifically for the Erbauer ECS18-Li 18V Circular Saw . It holds the saw securely while keeping it easily accessible in your workshop. ✅…

Bauer Small Modular Toolbox Dividers

I needed a long divider for my Bauer Small Moduler Toolbox . Here it is. I made a smaller one as well. The Bauer parts pinch a little at the bottom, so the fit is quite snug

Erbauer ERB690CSW Plunge Saw - Cover

Cover for Erbauer ERB690CSW Plunge Saw

Bauer 20V battery holder

Yet another Bauer battery mount. I have a cart with 2X4 supports so my main criteria were 1) had to fit on a 2X4 and 2) one print for all size batteries. I didn't see what I wanted so I rolled my own. If anyone wants the fusion360 source…

Bauer (Harbor Freight) Battery Holder

I designed these battery holders for Harbor Freight's Bauer line of tools, with the idea that the batteries lock into place, thereby allowing you to mount them upright and slide the battery in from below. This way you can see the power…

Bauer Oscillating Tool Wall Mount

This is just a small modification of the tool hanger made by @Eightbit. All I did was expand it to about 70mm in width. It fits the oscillating tool made by Bauer but likely fits other tools that have a wider handle. No supports required.…

Bauer Shop Vac Adapter: 2.25in-1.75in

This Bauer 6 Gallon, 4 Peak HP Wet/Dry Vacuum adapter will allow you to connect your vacuum to a 2.25in inside diameter tool like the Bauer 4 in. x 36 in. Belt and 6 in. Disc Sander. It works printed in PLA vertically with no supports.…

Eddie Bauer Luggage Handle Repair

My coworker found a nice set of luggage and got it cheap due to a broken handle. Before he went hunting for a replacement he asked me if I could model and print a replacement. We have yet to test the part fully assembled part but the…

6/12 Port Siren for Bauer Bench Grinder

Have a Bauer Bench Grinder lying around? And think about getting a stronger one later on? Or have one just for a siren project? Well do that and use the Bauer one to use as a siren! Bauer Bench Grinder Used:…

BAUER/HF MODULAR STORAGE SYSTEM GRIDFINITY (Medium)

This is a replacement "tray" for the Bauer Modular Storage System Medium sized box. It has a Gridfinity Refined baseplate with the 15mm thumbscrew to hold down the bins. (No magnet holes). It completely replaces the red bins. There is a…

Rosenbauer keychain

Rosenbauer keychain Rosenbauer keychain withour background

bauer 20v tool mount

a 20v bauer tool mount with precision for holding tools extra securely you can mount it basically anywhere in any orientation though on a wall prongs down is not recommended but will hold most tools for best results: account for the…

Wen Drywall Sander hose to Bauer (Harbor Freight) Dust Collector

Adapter converts the smaller hose on a Wen Drywall sander to the larger inlet on a HF Dust Collector.

Bauer Belt Sander to 1-1/4 vacuum hose attachment

I needed a 45 deg. vacuum/dust extractor 1-1/4 in adapter for my Bauer belt sander to replace the stock bag (does nothing but throw dust in the air). Everything fits snug and works perfectly. The port to the belt sander is ~30.75 mm…

Vacuum Adapter for 1-1/4" Hose and 1-3/8" Attachment (32mm to 35mm), fits Bauer Wet-Dry Vacuum, Shark Rotator

Adapter to allow the use of Shark or other vacuum attachments with a 35mm inner diameter (~1-3/8") on a vacuum with a hose of 32mm (~1-1/4") outer diameter. Does not work the other way around. The hole is straight all the way through with…

Harbor Freight Bauer Band Saw 45 Degree Adapter

This adapter plate for the Bauer portable bandsaw from Harbor Freight makes cutting 45 degree angles easier as it gives more support to the piece being cut. I printed in orange to make it easier to find in my shed :) Enjoy! Print…

HSW battery holder / HSW porte-batterie Erbauer

🇬🇧 Description (English) Keep your workshop tidy and efficient with this battery holder designed for Erbauer 18V batteries , perfectly suited for HSW (Hole Storage Wall) panels. The snug fit keeps the battery securely in place while…

Bauer Terminal Block

Crude terminal block for Bauer tools. Use spade connectors to to mate with the tool terminals. Glue the connectors to this part once they are mounted to the tool's terminals. You need a 10k resistor from negative to the temperature sense…

Pawn/Bauer Chess

Print it, use it and have fun! If you like the model, please consider leaving a like, downloading it or giving it a recommendation! Creative-Prints

Helmhalter für Feuerwehrhelm Rosenbauer HEROS

Helmhalter für Feuerwehrhelm. So kann der Helm im Fahrzeug sauber verstaut werden. Gedruckt in PETG mit 45 Grad Neigung für bessere Stabilität. Der Helm liegt auf dem Nackenpolster des Rosenbauer Heros auf. Passt eventuell auch noch bei…

Mount/holder for Harbor Freight Bauer 20V Cordless 150/300 Lumen Compact Flashlight

Designed to fit Bauer 20V 1.5 or 3Ah battery attached to Bauer 20V Cordless 150/300 Lumen Compact Flashlight. Works well to light up my closet. Mount/holder has two #8 countersunk holes for mounting. Model should be printed upright, with…

Bauer 19121E-B 45-degree angle base plate

This is a base plate for the Bauer 19121E-B router that allows you to router at a 45-degree angle.

Bauer charger wall hanging case

A bottom half of the Bauer Harbor Freight brand charger. The stock one does not come with an option to hang on a wall, this one has cutouts for screws to hang it. 5/1/2022 - edited and added an update with further recessed screw holes on…

Erbauer drill holder HSW / crochet visseuse Erbauer HSW

🇬🇧 Description (English) 3D-printed hook designed to securely hold an Erbauer drill on a Honeycomb Storage Wall (HSW). This mount keeps your tool neatly stored, visible, and ready to grab. It’s easy to print and requires no supports. 🔧…

Bauer 20v vac accesory hanger

Wall mounted hanger for storing Bauer 20v handheld vacuum accessories.

Pawn / Bauer

If you appreciate my work, I would be happy about feedback and support! :) Wenn Sie meine Arbeit wertschätzen, freue ich mich über Feedback und Support! :)

Bauer Shop Vac Adapter: 1.25in-1.75in

This Bauer 6 Gallon, 4 Peak HP Wet/Dry Vacuum adapter will allow you to connect your vacuum to a 1.25in outside diameter tool like a chop saw.

Bauer trim router base plate 5" V1.0

As you can see I made the base a 5" round instead of a square. The Warrior dovetail jig requires a minimum 4" (actually probably 4.25") round base in order to set up the fence. This is a little bigger than that. Anyway I can't tell if…

male click for Bauer hockey goalie mask

The male fastening of a hockey goalie helmet broke. The helmet is Bauer brand and the metal clips were damaged. I replaced them with these printed in PETG. La sujeción macho de un casco de portero de hockey se rompió. El casco es marca…

Bauer Cordless Vacuum Accessory Wall Mount

I wanted to keep the vacuum and its accessories together on a closet wall. It comes with a small brush, a crevice tool, a wand, and a floor attachment. There are plenty of battery and charger mounts for the Bauer 20V batteries (Harbor…

MPCNC Bauer router mount

Bauer router mount for MPCNC

Bauer DA Polisher Anti-Tip

Allows you to put the Bauer DA upside down on a flat surface without it tipping over. No additional hardware needed.

Gridfinity - BAUER 6 ft. x 1/2 in. Keychain Tape Measure

Gridfinity - BAUER 6 ft. x 1/2 in. Keychain Tape Measure

Kobalt battery to Bauer tool adapter

Kobalt battery adapter for Bauer tool, required internal components from DeWalt battery to Bauer adapter 5x M2.5x6 screw

Rosenbauer keychain

Rosenbauer logo on black background. Keyhole diameter 3 mm.