Bauer 20V battery power tap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
power tap for using Bauer 20V batteries to power devices. Use at your own risk and always take care around wiring.
- Ocena
- 4 / 5
- Polubienia
- 61
- Pobrania
- 421
- Wydruki
- 2
- Wyświetlenia
- 1779
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a power tap for using a Bauer 20V battery to power other devices.
Printing and assembly instructions included in the files.
Always exercise caution when working with wiring and lithium batteries. They will discharge very fast if shorted with extremely non-desirable results.
This uses M3 screws and M3 nuts for assembly. 2 ea. M3 X 20mm and 2 ea. M3 X 3mm screws and 4 ea. M3 nuts.
Also used is 14ga. silicone jacketed wire and XT60 connectors.
(Be careful if trying a different wire gauge. The strain-relief on the cap is sized for 14ga. wire. Also, be sure to use a wire gauge adequate for the current you will draw when using.)
I used a brass piano hinge to create the contacts that engage the battery connectors.
The piano hinge is cut with a dremel tool to create two rectangles 17mm long X 8mm wide.
The two rectangles are bent 90° approx. 3mm from one end to allow a positive stop when installed and create a flat surface for soldering the wire.
This works well with DC powered pencil soldering irons like the Pinecil, TS100 or similar. It can also be used as a power source for various other bench-top applications.
Amazon Links for the parts are below:
M3 screws and nuts:
https://www.amazon.com/dp/B07Z4YH6NP?psc=1&ref=ppx_yo2ov_dt_b_product_details
Silicon wire and XT60 connectors:
https://www.amazon.com/dp/B07L3JMZPJ?ref=ppx_yo2ov_dt_b_product_details&th=1
Brass piano hinge: