Vacuum Adapter for 1-1/4" Hose and 1-3/8" Attachment (32mm to 35mm), fits Bauer Wet-Dry Vacuum, Shark Rotator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to use 1-3/8" attachments on a 1-1/4" vacuum hose. Does NOT work vice versa!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Adapter to allow the use of Shark or other vacuum attachments with a 35mm inner diameter (~1-3/8") on a vacuum with a hose of 32mm (~1-1/4") outer diameter. Does not work the other way around.
The hole is straight all the way through with no bumps or stops to catch dirt.
Insert the large end of the adapter into the attachment, and the hose into the smaller end.
Print Settings
Infill: N/A
Support: N/A
Orientation: Print upright on either end.
Due to the part's small footprint, cleaning the build plate before printing and/or using a brim is recommended.
Designed in Autodesk Fusion. Made this for my own use, might as well publish it.