1 / 2
Vacuum Adapter for 1-1/4" Hose and 1-3/8" Attachment (32mm to 35mm), fits Bauer Wet-Dry Vacuum, Shark Rotator — image 1
1 / 2

Vacuum Adapter for 1-1/4" Hose and 1-3/8" Attachment (32mm to 35mm), fits Bauer Wet-Dry Vacuum, Shark Rotator

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter to use 1-3/8" attachments on a 1-1/4" vacuum hose. Does NOT work vice versa!

Rating
0 / 5
Likes
5
Downloads
52
Makes
0
Views
250
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Adapter to allow the use of Shark or other vacuum attachments with a 35mm inner diameter (~1-3/8") on a vacuum with a hose of 32mm (~1-1/4") outer diameter. Does not work the other way around.

The hole is straight all the way through with no bumps or stops to catch dirt.

Insert the large end of the adapter into the attachment, and the hose into the smaller end.

Print Settings

Infill: N/A
Support: N/A
Orientation: Print upright on either end.
Due to the part's small footprint, cleaning the build plate before printing and/or using a brim is recommended.


Designed in Autodesk Fusion. Made this for my own use, might as well publish it.

Tags