Big Zombie Remix - rebased and hollowed for resin printing - original by Schlossbauer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Schlossbauer's excellent work - significant improvements to base and main model hollowed for resin printing.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
All credit to Schlossbauer for the original model - follow the links to his orignal model and support him on patreon if you can.
I'm uploading this remix as I found myself spending a significant amount of time reworking the model both to optimise it for resin printing and to replace the somewhat chunky and dull base of the original. Hopefully this remix can save some other folks a bit of time.
List of modifications is as follows:
- Removed the blocky, dull base of the original model.
- Resized for industry-standard 1" grid play (this model is sized for a 2" round base now).
- Hollowed the body for more economical resin printing.
- Punched holes both in the outer shell and internally to avoid the "suction-cup" effect.
- Created a new base including carefully placed “footprints” to securely attach the main model after printing.
Supplied both as a pre-hollowed version and a hollowed-and-supported version. The base will print directly on the build plate and needs no supports (immerse the build plate in very hot water for easier removal).
