Liczymy pasujące modele…
I couldn't find a complete set of summons for the Beast Tyrant so I created it from various models I found around the interwebs, with some smaller or larger modifications. I also fixed a few errors in those models by running them through…
Hey everyone - here's my take on the Frosthaven summon, the Raging Corpse! As always, the .blend file and any pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA…
I printed the feets on a flat and glued the rubber from the original feets with clasic superglue. I hope this helps someone.
This Shadow Void Assassin stands amidst shattered stone, cloak torn and armour corrupted, as if summoned from another realm. With arms extended in a commanding gesture, the sculpt captures the moment between control and chaos — whether…
A detailed circular ritual platform engraved with arcane runes and ancient symbols, surrounded by four evenly spaced stone pillars. This imposing structure evokes forbidden ceremonies, summoning rites, and long-forgotten magic etched into…
I made this design using Virtually Jason's banner from the banner spear. Enjoy
Here's my proxy model for the Frosthaven summons, the Jackal Mech! The artwork for this guy is at https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-jackal-mech-front.png. As you can…
I made this model to be a proxy for the Frosthaven Repair Drone (https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-repair-drone-front.png)! As you can tell from the artwork, this guy…
Here's my proxy model for the Frosthaven Summons, the Dampening Unit! The artwork for this guy is at https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-dampening-unit-front.png. As you…
You've just summoned a very polite and dapper looking ghost. He seems to be pretty happy about it. He's only small and can't do any harm. No supports needed if your printer can handle some small overhang. Layer size around 0.12-0.16mm.…
Prints at a 45 degree angle in one piece with support to the bed only, or in two pieces that can be glued together. Separate and full STLs available, along with the gcode I used to print.
I made a proxy model for the Machine Bolter (https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-machine-bolter-front.png)! This automated turret minigun doesn't require a base, since the…
My Standee for beater look and planing in-game. Print Settings Printer Brand: Anet Printer: A8 Supports: No Resolution: 0.12 Filament: Creality PLA Category: Games
Here's a model that I made for the Frosthaven summons, the Toxin Distributor (https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-toxin-distributor-front.png)! As you can tell, this guy's…
Here's my proxy model for the Trapping Unit! The original artwork is at https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-trapping-unit-front.png ; as you can see, I made some changes…
Here's my proxy model for the Frosthaven Summons, the Sword Propeller! The artwork for this guy is online at https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-sword-propeller-front.png…
Upgrade your game tokens! Thicker, more robust plastic chips to replace the cardboard Boost and Damage tokens that come with the game, plus a custom Magic tracker. I suggest printing 16 or 20 each of Boost and Damage, plus 2 Magic…
Not the first organizer for Summoner Wars, but I tried to address some shortcomings I saw in the ones I looked at. Everything is sized for the 2nd Edition Master Set box, which measures an inner length/width of 290mm for me. The card…
This is a standee base that I made to integrate with Sgtcaffrans Frosthaven standee HP counter . It can also be used as a standalone standee elevator to indicate a monster tor character is flying in your Frosthaven/Gloomhaven Games. I…
Organizing insert for Summoner Wars board game by Matagot. Allows to hold and organize the game and all its expansions in the game box. Includes 24 Faction slots, one Mercenary slot and storage for 2 dice sets. Ready to play: quick setup…
Here's the proxy model that I made for the Frosthaven Summons, the Bombardier! The artwork for this summons is online at…
Here's a model that I made for the Shield Spider (https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-shield-spider-front.png)! As you can tell, I took more inspiration from the summons's…
This is a keyboard specifically for summoning your summons in FFXIV! Although, technically it could be programmed to do anything you want - please watch the tutorial linked below to see what is required for this as I will not attempt to…
A owl that commands spirits summoned from the worlds beyond. A funny DND idea I had. Collect them all! Over 20 Owls available!! COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Tree Supports on build plate…
Here's the model that I made to act as a proxy for the Frosthaven summons, the Sledge Driver! The artwork for this guy is available online at…
Here's a model that I made to proxy for Frosthaven's Shadow Beast Summonable (artwork at https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-shadow-beast-front.png)! Knowing that the…
Here's my proxy model for the Frosthaven summons, the Shadow Horror! I worked hard to ensure that all of the fangs would be angled in a way that allows them to be printed without supports, so you should only need to get support points on…
This was one of the cleanest rat models. Took and tweaked the design to include more of them on a hex platform. Looks awesome for Gloomhaven replacement of those cardboard summons tokens! Category: Toys & Games
Here's my model for the Frosthaven summons, the Defense Grid (artwork at https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-defense-grid-front.png). I had an ambitious idea, what if we…
Here's the model that I made to proxy for the Frosthaven summons, the Longbowman! I really liked the pose in the artwork, so I worked hard to capture it in a 3D-printable way. This guy obviously needs a lot of supports, but they were…
Inspired by Titor's collection of Soul Stones https://www.thingiverse.com/thing:1694620 I finally created a few more of the missing ones. Category: Toy & Game Accessories
Here's the model that I made to proxy for the Frosthaven summons, the Polar Cat! This will also work well in any TTRPG for a tiger, leopard, or other large cat! There's nothing too unexpected required to support this model, just make sure…
Here's a model that I made to be a proxy for the Reinforcement (https://github.com/any2cards/worldhaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-reinforcement-front.png)! The different textures on this guy's armor…
This is your new wizard pad, you just don’t know it yet. Perfect for summoning, teleportation or just hanging out in a safe place while the summoned demons play with the villagers around you.
Here's my proxy model for the Frosthaven Summons, the Snow Fox! When making quadrupeds, it's really important to figure out a pose that will add some verticality to the creature, elsewise it will have to be absolutely tiny to fit on a 1…
Demonic creature emerging from a summoning circle — perfect centerpiece for RPG boss battles or dark fantasy displays.
Here's my proxy model for the Frosthaven Summons, the Torch Bearer! She certainly needs supports to print successfully, but I eliminated them where I could and got the model down to a pretty manageable amount of support requirement that's…
100x160mm sign, with art of a summoning pentagram and candles, reading “No Summonings in Restrooms”. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames…
Here's my proxy for the Frosthaven summons, the Trained Falcon! A very horizontal creature like a soaring falcon always presents a challenge when trying to figure out a pose that'll allow it to fit on a base and still be large enough for…
I printed the feets on a flat and glued the rubber from the original feets with clasic superglue. I hope this helps someone.
A base rim with added "Summon spell" effects from Divinity Original Sin 2. Made for miniature wargaming tabletop games & story-driven RPG tabletop. This model is based off of its appearance in Divinity Original Sin 2: A 25mm wargaming…
This Shadow Void Assassin stands amidst shattered stone, cloak torn and armour corrupted, as if summoned from another realm. With arms extended in a commanding gesture, the sculpt captures the moment between control and chaos — whether…
A detailed circular ritual platform engraved with arcane runes and ancient symbols, surrounded by four evenly spaced stone pillars. This imposing structure evokes forbidden ceremonies, summoning rites, and long-forgotten magic etched into…
Here's my proxy for the Frosthaven Bone Shaper summon, the Bone Horde! The various sword arms need supports, as do several chins. Depending on your bed adhesion, you may want to add some supports near the bottom of the legs to help keep…
12/20/2025 update: I've added a v2 of the model that should be easier to print. I've also increased the sizes of some of the details on the model to make them easier to paint. Here's my proxy model for the Frosthaven summon, the Skeleton…
Here's my proxy model for the Frosthaven summon, the Wraith! This could be used fairly well for the OG Gloomhaven monster, the Living Spirit, or even for any sort of wandering spirit in a DnD game =) The chains needed a ridiculous amount…
Here's my take on the Boneshaper Summon, the Stitched Atrocity! This guy's pretty disturbing and generally prints without needing supports, but I put a couple on its lower legs just to give it a bit more stability during the printing…
I made this design using Virtually Jason's banner from the banner spear. Enjoy
Since thingiverse can't seem to get their shit together and actually show the models that we upload under our profiles or in searches, this is the only way to get some models shown. If you want the files for the real model, you can click…
I did not design this model. I downloaded this from here some time ago, but only recently got around to printing and painting it. The original is no longer available, nor can I find it or it's original creator. I am posting it here mainly…
Modification of the summonable character. A 25mm base has been added with the option of mounting a 6x1 mm magnet. The magnet can be glued to the base. I recommend using UV hard resin glue. Printed on a resin printer.
Remixed SonjaSelena's model as I wanted mine to last longer, and the springy/gap design looked like it might snap easily. Added a simple round 'coin' back, so that it's a solid object, with the sickness shape sticking out of it. I don't…
My character in a current D&D (Pathfinder 1E) game pulls tokens out of a bag, to see what they summon. These tokens could be used as the monster being summoned. For my miniatures, I basically did a bunch of quick remixes for dolphin,…
☆ A cute crystalline spirit summoned to serve as your familiar and test print! This little peanut (yes I named him and I'm sticking with it!) makes a great test model and swatch for new filaments, and a cute model to show friends. Based…
I loved the original design, but it didn't fit sleeved cards, so I just made the boxes a little larger to accommodate sleeves, and made lids for the card boxes so the cards don't fall out. I also added token holders with lids to speed up…
Print in 3 colours (logo mode) Like my work? Consider tipping me at https://ko-fi.com/karolinak
This is a summoning stone for Scenario 4 of the Jaws of the Lion boardgame. Summoning swirls were added onto a rock formation .STL offered by Terrain4Print. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
From Spongebob S3 E57 The Camping Episode. To prove sea bears don't exist, Squidward does all the things sea bears hate: Waving a flashlight back and forth Holding cubed cheese Stomping around Wearing a hoop skirt Wearing clown shoes…
Here's a stab at creating the Ghost Falcons and the Twilight Archon for the Aesther Diviner class in Gloomhaven. To be honest, I don't have the faintest idea what a "twilight archon" is supposed to be or what it's supposed to look like…
pin backs https://www.amazon.com/dp/B072B9XGZ4/?coliid=I11H4RWUL86QX4&colid=1POIT9VA0GIIA&psc=1&ref_=lv_ov_lig_dp_it https://www.amazon.com/dp/B088BFCRNQ/?coliid=IZRDKMUNVIN77&colid=1POIT9VA0GIIA&ref_=lv_ov_lig_dp_it&th=1
This is an insert for Let's Summon Demons by Dyno Mite Games. It holds the dice and the tokens and then next to it goes the circular cards. The rulebook goes on top and keeps pieces from moving in the box stored sideways or flat. I put it…
Contains space for up to twenty factions in sleeves, two separate containers for boost/damage tokens, a large box for dice, and two card racks. Room for a foldable dice tray! The thick play board would cause some lid lifting. Can be…
Print in whatever orientation you want. Easy to orient so it doesn't need supports. Try keeping the layer lines aligned so you it looks consistent. Needs no additional parts. I've printed out of both PETG and PLA with success. Print 1 of…
Overview Summoner Wars second edition is a great head to head card game that was released in 2022 and continues to see updates. The Starter Set is a good entry point into getting into the game and starting your collection. Unfortunately,…
There are numbered stands for monsters but somehow my printer sucks at printing numbers. Numbers too small could be hard to read when playing, but number too big would cause an artistic disaster. The base is 28mm in diameter. The depth of…
Wanted an easy way to store Summoner Wars 2nd edition. This was it. The tokens you see here I printed using the MMU. If there are people that can do multi color, let me know and I will put the tokens up as well. There are two cases. One…
The pentagram was made using HueForge, and the ghost was made in Nomad Sculpt. Perfect for Halloween :) The included .3mf has all the multicolour information--however, it is unfortunately only compatible with BambuStudio. To my knowledge,…
I wanted one for my wall for the funny factor but could not decide on the hanging method and made three just in case.
Here's a model that I made for the Frosthaven Summons, the Animated Claymore! There's an online image to use as a painting reference for the colors that doesn't spoil which class gets this summon. In Frosthaven it's a crystalline blade,…
Here's my model for the Spiritbound Falchion, a summons from Frosthaven! The Frosthaven version has a green crystalline blade, but since floating animated weapons are useful in so many fantasy settings, I've also included a metal bladed…
Here's my proxy model for the Frosthaven Summon, the Shaggy Lure ! This guy's a bit of a scarecrow looking lure that seems to have been hastily constructed out of some loose furs, sticks, and leaves. It was actually really fun to make!…
Here's my proxy model for the Frosthaven Summons, the White Owls ! There are two standees for this summon, so you'll want to print it twice to cover them both. Big thanks to Rafał Urbański for sharing his excellent Feather alphas at…
Here's my proxy model for the Frosthaven Summons, the Arcing Generator! This guy's a little crawling robot with a big rod sticking out the top of it, from which arcs of electricity can spark. The original artwork for this summon can be…
Here's my proxy model for the Frosthaven Summons, the Armored Tank! This guy needs some supports on the front and the back, both along the treads and on the obvious protruding parts. Fortunately, the bulk of the model is very solid…
Another D&D character from High School, Johnny was a unique character who's player rolled only one die for each stat, and who I gave 10x the starting gold to as a compromise. In response, the player bought hordes and hordes of chickens…
Here's my model for the Frosthaven summons, the Banner of Courage! This guy ended up needing a lot more support than I was hoping it would, but that's the way the cookie crumbles sometimes. It was a great learning experience, which I'm…
Here's my proxy model for the Frosthaven Summons, the Banner of Doom! I've tried to make this one as distinct as possible from the Banner of Courage so that it'll still be recognizable as the Banner of Doom even if it's unpainted, which…
Here's my proxy model for the Frosthaven Summons, the Banner of Hope! The artwork for this banner is at https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-banner-of-hope-front.png; I…
We were playing this week, and thinking, that it would be nice to have some kind of marker to show what cards has summoning sickness. So I made this. And because someone else might want to use these too, here! It was inspired by the old,…
Here's my proxy model for the Frosthaven Summons, the Banner of Strength! The artwork for this model is at https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-banner-of-strength-front.png…
Here's the proxy model that I've made for the Frosthaven summons, the Banner of Valor ! As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should…
The insert requires 3 off card trays and 3 off trays to be printed and sits flush with the top of the box while keeping the board in position with no box lift. Dice, health tokens and boost tokens each has their own removable tray with…
Here's the model that I made inspired by the Frosthaven summons, the Flesh Fiend! This guy's a muscle-bound hulk with malformed hands and face and a chain and collar. Chains are always a pain when it comes to 3D printing, as the various…
Here's my proxy model for the Frosthaven Summons, the Flesh Bomb! This is a horrible mass of flesh and limbs. Enjoy! As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although…
Here's my proxy model for the Frosthaven Summons, the Sniper Turret! This artwork for this guy is at https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-sniper-turret-front.png; as you…
This is one of the 5 activators that needed to be activated in order to summon Diablo in the Diablo 2 Video game. I created it for custom Zombicide maps.
Here's my proxy model for the Frosthaven Summons, the Leaper! The artwork for this guy is at https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-leaper-front.png and as you can see, it's…
