Hypercube Evolution Heat Bed Strain Relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found the original at Thingiverse (https://www.thingiverse.com/thing:3036241) but the "hook" to attach the strains…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found the original at Thingiverse (https://www.thingiverse.com/thing:3036241) but the "hook" to attach the strains to was a bit to flimsy and weak for me (actually broke two times on two models while attaching the strains).
So I removed the hook, widened the hole at the front and introduced a small "tunnel" for a zip tie or similiar.
It fits my needs perfectly and maybe somebody else can make use of it, too.
Credits to "Kattstryparen" for the original design.
Print Settings
Printer:
HEvo 3D (Core XY)
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Filament:
Black
Notes:
To improve stability, I used three wall lines and six bottom and top layers. Rock-solid even with only 25% infill.
Category: 3D Printer Parts