Pinecil + Omnifixo Deluxe Travel Solder Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Storage/Travel Organizer for Pinecil soldering iron and Omnifixo Third hand tools along with related essentials.
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 1333
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Stores and organizes:
- Pinecil soldering iron
- 6 Pinecil soldering tips (short
- Omnifixo third hand tool (held in place by magnets)
- PinePower 65w USBC power supply
- USB-C to USB-C power cord
- Solder in a tube
- Desoldering braid in a standard roll
- Brass shavings ball for tip cleaning
- Soldering iron stand
- Tip tinner
There's some extra room for a few additional small items as well.
Bill of Materials:
- Soldering iron cleaner (brass ball) from Amazon: https://www.amazon.com/dp/B09NL2QTWM?psc=1&ref=ppx_yo2ov_dt_b_product_details
- Lead Free Tip Tinner TT-21G from SRA : https://www.amazon.com/dp/B07PHMZ4L8?psc=1&ref=ppx_yo2ov_dt_b_product_details
- No-Clean Flux Wick from SRA, 2.5mm x 3m : https://www.amazon.com/dp/B09PZLZSNT?psc=1&ref=ppx_yo2ov_dt_b_product_details
- Pine64 Pinecil : https://pine64.com/product/pinecil-smart-mini-portable-soldering-iron/
- Pine64 PinePower : https://pine64.com/product/pinepower-65w-gan-2c1a-charger-with-international-plugs/
- Pine64 1.5m USB-C PD silicone cable : https://pine64.com/product/usb-type-c-to-usb-type-c-silicone-power-charging-cable-1-5-meter-length/
- Pine64 Pinecil fine / short tips https://pine64.com/product/pinecil-soldering-short-tip-set-fine/
- Solder in tube (I wanted this exact solder, had to cut the tube shorter to fit): https://www.digikey.com/en/products/detail/chip-quik-inc/SMDSWLF-020-4OZ/8681836?so=84797010&content=productdetail_US&mkt_tok=MDI4LVNYSy01MDcAAAGQfzSTUSKAKo0UNOyTwXL63g8osdWGRPztVD-W4EMsZwIlWk-V3m3u1d9SXeoT0p3HS8jZRW25ylwxp5cfIPzyvzOeQjCNrkfqbxBOqQGg
- 608 Bearing for iron holder : https://www.amazon.com/dp/B07H83VV6B?psc=1&ref=ppx_yo2ov_dt_b_product_details
- Four(4x) 3/8"x3/16"x1/16" N42 magnets : https://www.kjmagnetics.com/proddetail.asp?prod=B631
- m3 x 5mm threaded insert for clamping the 608 bearing: https://www.printedsolid.com/products/cnc-kitchen-threaded-insert?variant=40670885740629
- m3 x 16mm stainless SHCS (Socket Head Cap Screw) bolt for clamping the 608 bearing
I used some CA glue on the magnets, but it didn't seem necessary on my printer as the magnets were a snug fit.
The metal case for the brass ball snaps into place and is held firmly. The large circular hole for this metal case has a built-in support in the model. With a fresh roll of Jesse PETG the built-in support snapped out very nicely and required a minimum of smoothing/trimming with a knife blade to leave a clean surface inside and out.