Toolhead Chain Clips V2 - X/P Series
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Toolhead Chain Clips hold your PTFE tubing securely to the toolhead chain, protecting your PTFE tubing from slamming
- Ocena
- 4,923 / 5
- Polubienia
- 194
- Pobrania
- 1382
- Wydruki
- 15
- Wyświetlenia
- 4584
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Toolhead Chain Clips V2
The Toolhead Chain Clips V2 hold your PTFE tubing securely to the toolhead chain, protecting your PTFE tubing from slamming around.
📢 Position each of them between the back of the printer and the existing black clips already connected to the toolhead chain.
BENEFITS:
- Fast to print
- Easy to use
- Perfect fit
- Designed for FDM Printing
- No support needed
- Smooth Operation
- Helps eliminate noise from the PTFE tube
INSTALLATION:
- Attach Clips: Insert and attach one side of the clip, then push and rotate to insert the other side. Repeat for the other clips.
- Verify Clip Insertion: Push down on each clip to ensure it's snug but allows 2mm sliding movement front and back.
- Install PTFE Tube: Push the tube securely into the top notch.
Your installation is complete! Ensure all components are properly aligned and attached before use.
I recommend using 6 clips, alternating one to two, all placed between the back of the printer and the black clip already present.