Toolhead Chain Clips V2 - X/P Series
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Toolhead Chain Clips hold your PTFE tubing securely to the toolhead chain, protecting your PTFE tubing from slamming
- Rating
- 4.923 / 5
- Likes
- 194
- Downloads
- 1,382
- Makes
- 15
- Views
- 4,584
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Toolhead Chain Clips V2
The Toolhead Chain Clips V2 hold your PTFE tubing securely to the toolhead chain, protecting your PTFE tubing from slamming around.
📢 Position each of them between the back of the printer and the existing black clips already connected to the toolhead chain.
BENEFITS:
- Fast to print
- Easy to use
- Perfect fit
- Designed for FDM Printing
- No support needed
- Smooth Operation
- Helps eliminate noise from the PTFE tube
INSTALLATION:
- Attach Clips: Insert and attach one side of the clip, then push and rotate to insert the other side. Repeat for the other clips.
- Verify Clip Insertion: Push down on each clip to ensure it's snug but allows 2mm sliding movement front and back.
- Install PTFE Tube: Push the tube securely into the top notch.
Your installation is complete! Ensure all components are properly aligned and attached before use.
I recommend using 6 clips, alternating one to two, all placed between the back of the printer and the black clip already present.