Filament Spool Winder for 2.5 kg Spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified model from GekoPrime. Modified base to attach it to a board + attachment for 2.5 kg spools.
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 644
- Wydruki
- 0
- Wyświetlenia
- 4480
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I took the model from GekoPrime and adapted the base. The sides have been given a fixed base, which has holes with countersunk holes for 4x30 screws. These were used to attach the spool winder to the board.
I also constructed a holder for the 2.5 kg filament spools, which is suitable for spools measuring 300 mm x 100 mm and a hole diameter of 50 mm.
This is also mounted on the board.
However, a brake for the large spool must be fitted for successful use, as GekoPrime uses on its model. Otherwise the large spool will continue to rotate when the small spool is stopped and the filament will unwind unintentionally.