Filament Spool Winder for 2.5 kg Spools
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified model from GekoPrime. Modified base to attach it to a board + attachment for 2.5 kg spools.
- Rating
- 5 / 5
- Likes
- 73
- Downloads
- 644
- Makes
- 0
- Views
- 4,480
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I took the model from GekoPrime and adapted the base. The sides have been given a fixed base, which has holes with countersunk holes for 4x30 screws. These were used to attach the spool winder to the board.
I also constructed a holder for the 2.5 kg filament spools, which is suitable for spools measuring 300 mm x 100 mm and a hole diameter of 50 mm.
This is also mounted on the board.
However, a brake for the large spool must be fitted for successful use, as GekoPrime uses on its model. Otherwise the large spool will continue to rotate when the small spool is stopped and the filament will unwind unintentionally.