Fully Jarvis Standing Desk Cable Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cable clip to fit under a Fully Jarvis standing desk.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 405
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
A cable clip to fit under a Fully Jarvis desk that let's you feed the cables through it for better organization. The clip fits over the smaller middle beam in the middle of the desk support.
Printed in PLA with .3mm layer height and a .4mm nozzle. I used 4 walls for extra stiffness,which was basically 100% infill.
This clip is very specifically made for a fully desk but could potentially fit others if they use the same steel stock. The slip is designed for a beam that is 15.7mm by 31mm, it requires at least 2mm between the top of the beam and the table.