Pellet Dropper Purging Sytem for MMU setups
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pellet forming and ejecting mechanism similar to the Bambu Lab purging system
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 596
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Update: Changed rotation of purse housing to intended printed orientation
BOM
3mm I.D. Bowden tube
MG90 Servo
M2.5x8 Self Tapping Screws
3 M3x14 Screws
2 M3x16 Screws
1 M3x6 Screw
1 M3x8 Screw
4 M3*4*5 Heatset Inserts
All parts can be printed in any material however it is recommended to print the flap out of ABS. The pellets may melt to the flap and become stuck if a lower tempature material is used.
The macros were created specifically for my printer so your settings/macros will be different
The included macros are designed to wipe horizontially so if you need to mount it to the side of the printer you'll need to edit the macros yourself
Make sure to edit the following values if you are using the included macros
[gcode_macro WIPE_NOZZLE]
description: Wipes the nozzle on the wiper
# X location of the center of the wiper in respect to the nozzle
variable_wiperlocationx:
# Y location of the center of the wiper in respect to the nozzle
variable_wiperlocationy: