1 / 2
Sonoff SNZB-03 Motion Sensor Cover / Screen — zdjęcie 1
1 / 2

Sonoff SNZB-03 Motion Sensor Cover / Screen

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Reduce the visible range of the Sonoff SNZB-03 Motion Sensor

Ocena
0 / 5
Polubienia
9
Pobrania
64
Wydruki
0
Wyświetlenia
507
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

This motion sensor is installed in the room with my Ender 3 Pro. I realized that when the 3D printer is operating, the sensor is triggering on this movement, causing it to signal occupancy/motion frequently and significantly impacting battery life. 3D Printer to the rescue! 

(Moving the sensor would have been another option… \_(ツ)_/)

Printed in Overture PLA, but any filament ought to work. I've uploaded the messy OpenSCAD file I used to make the design, so feel free to tweak it as you see fit. (Note: it's not particularly clean, as I fiddled with the numbers quite a bit.) Since my sensor is on the ceiling, the base of this model has a small lip to hold it onto the base of the sensor.

I printed mine as shown in the picture, using a brim, but it could have been oriented on its side which likely would have eliminated the need for a brim and bridging.

Tagi