Sonoff SNZB-03 Motion Sensor Cover / Screen
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reduce the visible range of the Sonoff SNZB-03 Motion Sensor
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 64
- Makes
- 0
- Views
- 507
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This motion sensor is installed in the room with my Ender 3 Pro. I realized that when the 3D printer is operating, the sensor is triggering on this movement, causing it to signal occupancy/motion frequently and significantly impacting battery life. 3D Printer to the rescue!
(Moving the sensor would have been another option… \_(ツ)_/)
Printed in Overture PLA, but any filament ought to work. I've uploaded the messy OpenSCAD file I used to make the design, so feel free to tweak it as you see fit. (Note: it's not particularly clean, as I fiddled with the numbers quite a bit.) Since my sensor is on the ceiling, the base of this model has a small lip to hold it onto the base of the sensor.
I printed mine as shown in the picture, using a brim, but it could have been oriented on its side which likely would have eliminated the need for a brim and bridging.
