1 / 3
Parametric TPU lid with lip to preserve food in (IKEA POKAL) glasses — zdjęcie 1
1 / 3

Parametric TPU lid with lip to preserve food in (IKEA POKAL) glasses

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A material saving TPU-based lid to seal common household glasses that can be adjusted to your needs

Ocena
0 / 5
Polubienia
9
Pobrania
75
Wydruki
0
Wyświetlenia
403
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

One often stores food in glasses and in the past I had used plates to seal them. Though with my 3d printer and TPU I had the chance to create a simple lid that allows to seal off any circular thing. I often use IKEA POKAL glasses to store food and thus will be adding here the models for the respective glass sizes.

I also added the Fusion 360 file if you want to adapt the lid to your own favourite round container. You can adjust the parameters to your likings.

The following parameters can be adjusted

  • thickness: How thick the top layer of the lid should be, I chose 3 x layerHeight. They come out quite nicely with an 0.2 layer height on my Bambu Lab X1C standard printing profile for their TPU 95A.
  • thicknessOverlap: the thickness of the part that’s overlapping the glass
  • overlap: how much the lead is overlapping with the glass
  • diameter: the top diameter of the glass that you seek to seal
  • diameterOverlapBeginning: the diameter of the glass at the beginning of the overlap. This is typically smaller than diameter to achieve some retraction of the lid, and a good seal.
  • lipDiameter: the diameter of the lip. Note that Circle used to sketch the lip is just half exposed so this means that half of the diameters sticking out and serves as the lip. 

Tagi