Bosch AL1830 Charger Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple mechanism to mount the Bosch AL1830 battery charger to a wall.
- Ocena
- 4,667 / 5
- Polubienia
- 29
- Pobrania
- 172
- Wydruki
- 3
- Wyświetlenia
- 1615
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This allows you to mount a Bosch AL1830 charger (and possibly other AL series ones such as the AL1815 or the AL1880) to a wall with the ability to quickly remove it when needed elsewhere. It makes use of a simple dove tail sliding mechanism. The AL chargers are for the Bosch Green aka Power4All aka. Home & Garden series.
Simply print two rail.stl, carefully remove the original screws and mount the rails using new 25mm long 3mm screws. Screw the mount.stl to the wall and slide in the charger.
I printed it in PETG using 0.3mm layer height, but I guess PLA would work just as well.
Fusion 360 and step files included, in case you want to make adjustments.