CR-30 CR30 Printmill X-Carriage - 5 Degree Angle - Direct Drive BMG - MGN12 Linear Rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another try to get parts to stick and look non-terrible
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 653
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
With the original X-Carriage i didn't get good adhesion, you surely know this problem.
20 degrees solved the adhesion problem but my prints looked terrible. So i tried a few different things and ecobra's files helped me a lot in that.
A 5 degrees offset solved the adhesion problems and finally got me good looking prints.
I wanted this to work with the cheapest available configuration to me, because i didn't want to waste any more money on a “maybe” again.
BOM:
1x BMG dual drive extruder (or a clone like mine)
1x pancake stepper
1x mgn12 for the X-axis
2x m3 heat set inserts for the hotend screws
1x Crypt's EB Fan Shroud / my remix for the hf adapter / any other fitting fan shroud
optional: Cheap high flow adapter - mine leaks a bit, but for now it's sufficient