CR-30 CR30 Printmill X-Carriage - 5 Degree Angle - Direct Drive BMG - MGN12 Linear Rail
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another try to get parts to stick and look non-terrible
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 67
- Makes
- 0
- Views
- 656
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
With the original X-Carriage i didn't get good adhesion, you surely know this problem.
20 degrees solved the adhesion problem but my prints looked terrible. So i tried a few different things and ecobra's files helped me a lot in that.
A 5 degrees offset solved the adhesion problems and finally got me good looking prints.
I wanted this to work with the cheapest available configuration to me, because i didn't want to waste any more money on a “maybe” again.
BOM:
1x BMG dual drive extruder (or a clone like mine)
1x pancake stepper
1x mgn12 for the X-axis
2x m3 heat set inserts for the hotend screws
1x Crypt's EB Fan Shroud / my remix for the hf adapter / any other fitting fan shroud
optional: Cheap high flow adapter - mine leaks a bit, but for now it's sufficient