Hand Plane Mounts for Wall Control
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These mounts make it easy to access your woodworking hand planes on the Wall Control pegboard.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 853
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This uses the DDD Printable Wall Control System (github) to mount the planes.
Planes:
- Stanley No 60 ½ Block Plane
- Stanley No 4 Smooth Plane
- Stanley No 5 Jack Plane
- Note - I have a Fulton plane of similar dimensions, but it is unlikely that anyone else owns this. I have instead posted a mount for a standard No 5 Jack Plane dimensions, but I have not physically tested it.
The top pieces will require support when slicing, I tried to keep this to a minimum.
There is a base and a top component to the mounts. The base requires inverted side pieces, and the top requires the standard. See the photos. I use inverted 2x2 angle brackets for the base (Left, Right, Center), and 2x1 L Bracket for the top (Left, Right).
I'd recommend using the locking spacers facing the wall mount, the 2x2 will work for the 60 ½, the 2x3 behind the No 4, and the 2x4 behind the No 5 . These can be used to lock in the mount using the threaded pin.
If you have another similar plane that you'd like to mount, contact me with dimensions and I can probably make a version for you.