Hand Plane Mounts for Wall Control
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These mounts make it easy to access your woodworking hand planes on the Wall Control pegboard.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 118
- Makes
- 0
- Views
- 853
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This uses the DDD Printable Wall Control System (github) to mount the planes.
Planes:
- Stanley No 60 ½ Block Plane
- Stanley No 4 Smooth Plane
- Stanley No 5 Jack Plane
- Note - I have a Fulton plane of similar dimensions, but it is unlikely that anyone else owns this. I have instead posted a mount for a standard No 5 Jack Plane dimensions, but I have not physically tested it.
The top pieces will require support when slicing, I tried to keep this to a minimum.
There is a base and a top component to the mounts. The base requires inverted side pieces, and the top requires the standard. See the photos. I use inverted 2x2 angle brackets for the base (Left, Right, Center), and 2x1 L Bracket for the top (Left, Right).
I'd recommend using the locking spacers facing the wall mount, the 2x2 will work for the 60 ½, the 2x3 behind the No 4, and the 2x4 behind the No 5 . These can be used to lock in the mount using the threaded pin.
If you have another similar plane that you'd like to mount, contact me with dimensions and I can probably make a version for you.