Wera Kraftform Plus Screwdriver Set 932/6 and 334/6 Wall Control Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for the Wera 932/6 or 334/6 set of Kraftform Plus Screwdrivers
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 556
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This uses the DDD Printable Wall Control System (github) to mount the screwdrivers.
932/6 Screwdriver set Kraftform Wera
334/6 Screwdriver set Kraftform Wera
Use a good percentage infill to keep this rigid, at least 40%.
For the sidepieces, I used standard 2x2 angle brackets (Left, Right). For mounting on a wooden pegboard, see this model set.
I'd recommend using the locking spacers facing the wall surface, 2x5 size. This can be used to lock in the mount using the threaded pin.
There are several other similar Kraftform Chiseldriver set mounts already in the DDD set, see here. If you have another similar set that you'd like to mount, contact me with dimensions and I can probably make a version for you.