*Solder free* Minimalist 3D Printed Fume Extractor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to use Components that don't need Soldering
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 635
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I use solder with lead and breathing those fumes can be deadly. So i started looking for a great fume extractor. I came across the "Minimalist 3D Printed Fume Extractor" by rdmmkr but i didnt want to solder the components without an extractor so i came up with this design of a Solder Free version based off rdmmkr's original design.
list of changes i made
Body:
➢ 38mm fan section needed to be widened to 38.5
➢ AC adaptor and wire holes were closed
➢ Hole for power plug created
➢ Recessed are for switch removed
➢ Enlarged the SwitchPlate holes for M3 screws
SwitchPlate:
➢ Removed switch and led hole
➢ Enlarged holes for M3 screws
Parts need:
➢ 2ea M3 screws (used to attach switch plate to body) - https://amzn.to/3HAKnue
➢ 4ea M3 screws (used to attach included grill to the back of body) - https://amzn.to/3HAKnue
➢ 120v AC fan - https://amzn.to/3HHgLLL
➢ Carbon Filter (cut a single filter into 4 smaller squares and stack two in the cartridge) - https://amzn.to/3SCebg6
➢ 4ea rubber feet https://amzn.to/3Sm1h4A
➢ OPTIONAL 120v remote switch with dimmer (i have not tested, if you do please let me know how it works in the comments. thanks!) -https://amzn.to/47U823p