BorgEl0n Musk - Wall Art 8x8" Framed

Download the instructions file to know which colours are best and when to change layers.

Decorate your music room, rec-room, office, business, walls with your favourite musicians with my Rock-Art and other series' of Fusion360art - combining AI, 3D modelling, 3D printing to kick up the aesthetics with minor investment. 

See club models for the frames as well to easily mount these lightweight fine art prints to the wall with a 3D printed frame and make a matrix of as many prints as you would like to fill your wall.

With Club subscription make giant wall size prints containing multiple images or even a giant print model split into parts.

Please do not share files as they are restricted for your personal or businesses non-commercial use and there are a lot of hours that go into creating the images and 3D models associated with the fine art print.

 Printing Tips

It is critical to have a properly configured Z height on your printer and a perfect layer 1, as the first two layers are critical and take about 3 hours on a Mk3S+.

Print with a brim of 2 if you get lifting on corners. I always do this now.

Setup a printer preset to:
1) Print at 100% infill 
2) Print with layer height of 0.08mm 
3) Print with a base layer of 0.16mm

or as otherwise instructed in the “print_name-instructions.txt file”.

Either
1) Print from the included g-code if you have a Prusa i3Mk3S or i3Mk3S+ printers. 
2) Use your slicer to define the manual colour changes of filament in the “print_name-instructions.txt file”

Clean nozzle before and after every print. I do this by heating to 260' and letting extraneous stuff fall off. Also then wipe nozzle clean. This really helps.