Recycling Bin Cleat - Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a French Cleat for my recycling bin. My wife wanted the bins off the floor and this solution is much cheaper…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Here is a French Cleat for my recycling bin. My wife wanted the bins off the floor and this solution is much cheaper than a Rubbermaid wall unit.
I've uploaded two widths. 170mm and 140mm depending on the size of your bin.
I hope this is useful to someone out there.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
25%
Filament: FIlaments 3D PLA EcoTough PLA White
Notes:
I used supports for the screw holes however it is probably not necessary. I printed this with the larger face on the print bed.
Category: Organization