1 / 5
BMW 1 Series F20 Phone Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
F20 phone mount that clips to ventilation grid
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 233
- Wydruki
- 0
- Wyświetlenia
- 2381
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (34)Powiązane
Printed with:
- stock Ender 3 V2
- Regular PLA
- 0.4 mm nozzle
- 100% infill
- Annealing at 100°C
I wanted to design a phone mount that clips onto the center ventilation grid in my BMW F20. However this proved to be much more difficult than expected.
- Firstly the clipping parts are prone to breaking. The current version should be sturdy enough.
- Temperatures at the dashboard in summer can reach temperatures up to 80°C, and the part simply melts away. The glass transition temperature of PLA is around 60°C, that of PETG around 80°C. According to a video of CNC kitchen Tg can be increased especially for PLA by annealing in an oven at 100°C. However this also increases brittleness. I have opted for annealing PLA at 100°C. However high temperature filaments are also available on the market at might be a better option (PETG, ASA, high temperature PLA ).
- During annealing, the part shrinks. Therefore I adjusted the dimensions, so that the clip fits after annealing at 100°C
I used the phone mount of a broken device, which is screwed on. I might refit one of the cool compliant models in the future.
This is a work in progress, please leave comments how I can improve and which BMW models it also fits.