Xfinity XHK1-UE Keypad Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nice little cover to keep a Xfinity XHK1-UE Keypad protected from the elements.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 362
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Nice little cover to keep a Xfinity XHK1-UE Keypad protected from the elements.
This zigbee keypad can typically be found online for about $20. The case was designed to keep it safe from elements but be warned that the keypad IS NOT waterproof. I am pretty comfortable keeping this out of direct rain.
You will need four 6x3 neo magnets for closure.
The picture above is printed in PLA but I would recommend printing in ASA for outdoor use.
Designed to fit on a 256x256 Bambu X1C at a 45 degree placement. You will want to scrape off the calibration lines at the front of the plate during the start of the print. It is tight!
Please don't judge my scruffy looking trim….it is due for some fresh paint in the spring :)