[Gridfinity 4x2] Bin for Fujifilm Instax SQUARE SQ1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple Gridfinity based bin for the Fujifilm Instax SQUARE SQ1 instant film camera.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Modelling
I'm not that good at Fusion360. I tried my best to make this tray fit the camera as snugly as possible. Over all, it turned out decent, but far from perfect. I was a bit more generous with the tolerances in some places, because I wasn't sure how precise my printer could print with it's 0.6mm nozzle.
Print Settings
Print time ~1 Hour 44 Minutes Minutes
Filament ~140 Grams
F3D File included, if you want to customise it a bit more
Print Settings (Ankermake M5C)
Nozzle 0.6mm
Filament PLA+
Layer Height 0.40mm
Layer Width 0.62mm
Perimeters 2
Top / Bottom Solid Layers 2
Seam Position Aligned
Infill 10% Rectilinear
You might need supports. (depends on your nozzle, material & printer).
If that is the case, use an overhang threshold of 50 and auto-generate the supports. This way, you get a nice and clean bracket for your Gridfinity Grid.
