[Gridfinity 4x2] Bin for Fujifilm Instax SQUARE SQ1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple Gridfinity based bin for the Fujifilm Instax SQUARE SQ1 instant film camera.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 38
- Makes
- 0
- Views
- 350
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
Modelling
I'm not that good at Fusion360. I tried my best to make this tray fit the camera as snugly as possible. Over all, it turned out decent, but far from perfect. I was a bit more generous with the tolerances in some places, because I wasn't sure how precise my printer could print with it's 0.6mm nozzle.
Print Settings
Print time ~1 Hour 44 Minutes Minutes
Filament ~140 Grams
F3D File included, if you want to customise it a bit more
Print Settings (Ankermake M5C)
Nozzle 0.6mm
Filament PLA+
Layer Height 0.40mm
Layer Width 0.62mm
Perimeters 2
Top / Bottom Solid Layers 2
Seam Position Aligned
Infill 10% Rectilinear
You might need supports. (depends on your nozzle, material & printer).
If that is the case, use an overhang threshold of 50 and auto-generate the supports. This way, you get a nice and clean bracket for your Gridfinity Grid.
