The 30-cent Spinner (yet another fidget toy, using 625ZZ bearing and US nickels)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is yet another fidget spinner. This one uses six US nickels for the weights, and a 625ZZ bearing in the center.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 539
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is yet another fidget spinner.
This one uses six US nickels for the weights, and a 625ZZ bearing in the center.
The ends have a "windowed" design, with snap-in retaining rings to hold the coins and bearing.
The central cap needs glue. Print two of those, press one in, add a drop of superglue, then press the other in and clamp together snugly for a while.
In addition to the US nickels, you should be able to use 5 and 10 Euro Cent coins also, and any other coin that's 20 to 21 mm in diameter and less than 2 mm thick.
Your printer needs to be well-calibrated to print this.
Print instructions
Licence: Creative Commons - Attribution - Non-Commercial - Share Alike Category: Mechanical Toys