The 30-cent Spinner (yet another fidget toy, using 625ZZ bearing and US nickels)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is yet another fidget spinner. This one uses six US nickels for the weights, and a 625ZZ bearing in the center.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 33
- Makes
- 0
- Views
- 539
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is yet another fidget spinner.
This one uses six US nickels for the weights, and a 625ZZ bearing in the center.
The ends have a "windowed" design, with snap-in retaining rings to hold the coins and bearing.
The central cap needs glue. Print two of those, press one in, add a drop of superglue, then press the other in and clamp together snugly for a while.
In addition to the US nickels, you should be able to use 5 and 10 Euro Cent coins also, and any other coin that's 20 to 21 mm in diameter and less than 2 mm thick.
Your printer needs to be well-calibrated to print this.
Print instructions
Licence: Creative Commons - Attribution - Non-Commercial - Share Alike Category: Mechanical Toys