Snap-in klipper expander mount - Voron V0 1515
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A snap-in mount for klipper expander with 1515 extrusions so no preloaded nut is required.
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 152
- Wydruki
- 1
- Wyświetlenia
- 662
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Snap-in mount for klipper expander designed for Voron 0, and probably most 1515 beam. No preloaded nuts required.
I found that all mounts reuired nuts and were blocking access to part of compratment. So i designed it to have klipper facing inside, and have it easily detachable when access is necesary.
It is designed to be printed with no suports, and no inserts are required. Just use M3 screws and its should be enough:) Depending on your bed adhesion it might require brim though, so be aware of possible stability issues.
Printed mine in petg, and it is probably best option to have it hold properly.
For snap mount i used Nevermore mounts to modify and have proven snap. Highly reccomend this design.