Hario Skerton (Rounded Handle Post) Drill or Electric Screwdriver Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter to let you use a drill or electric screwdriver to grind coffee in a Hario Skerton coffee grinder.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 444
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This is an adapter to let you use a drill or electric screwdriver to grind coffee in a Hario Skerton manual ceramic burr grinder.
Important: Keep the speed of the drill/screwdriver pretty low or you risk damaging your grinder!
Similar to http://www.thingiverse.com/thing:189452, but that one is for grinders with pentagonal handle posts, whereas this one is for the rounded-rectangle style posts.
Instructions
Should not require any supports or raft. I printed it solid at .2 layer height, but it would probably work with less infill and/or thicker layers.
You will likely need to do some cleanup on the bottom layers after printing, especially if your bottom layers tend to flatten out. I used some small files to grind it back to the correct dimensions.
It should chuck right into a drill. For an electric screwdriver, you may need to file the top part a bit to get it back to a pure hexagonal shape. There was some rounding on it when I printed mine.
Category: Kitchen & Dining