Hario Skerton (Rounded Handle Post) Drill or Electric Screwdriver Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter to let you use a drill or electric screwdriver to grind coffee in a Hario Skerton coffee grinder.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 54
- Makes
- 0
- Views
- 448
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
This is an adapter to let you use a drill or electric screwdriver to grind coffee in a Hario Skerton manual ceramic burr grinder.
Important: Keep the speed of the drill/screwdriver pretty low or you risk damaging your grinder!
Similar to http://www.thingiverse.com/thing:189452, but that one is for grinders with pentagonal handle posts, whereas this one is for the rounded-rectangle style posts.
Instructions
Should not require any supports or raft. I printed it solid at .2 layer height, but it would probably work with less infill and/or thicker layers.
You will likely need to do some cleanup on the bottom layers after printing, especially if your bottom layers tend to flatten out. I used some small files to grind it back to the correct dimensions.
It should chuck right into a drill. For an electric screwdriver, you may need to file the top part a bit to get it back to a pure hexagonal shape. There was some rounding on it when I printed mine.
Category: Kitchen & Dining