1 / 1
QIDI 40mm fan spacer/gasket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used as a spacer for the motherboard cooling fan on QIDI X-Plus 3 and X-Max 3 printers - decreases fan whine.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 147
- Wydruki
- 0
- Wyświetlenia
- 454
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (16)Powiązane
Used as a spacer for the motherboard cooling fan on QIDI X-Plus 3 and X-Max 3 printers - decreases fan whine. Will likely require slightly longer bolts than originals.
Print in any material, TPU might reduce any vibrations however don't believe it's necessary. Change Z height to increase or reduce thickness (model is 1mm tall).
