3D Hibiscus flower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This project needs some afterwork, some heat and some glue. Please watch the video below and read the description.
- Ocena
- 4,75 / 5
- Polubienia
- 207
- Pobrania
- 1276
- Wydruki
- 5
- Wyświetlenia
- 5632
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print the petals and shape them accordingly. I used my oven as a heat source here because I didn't have a heat gun at the time.
Note that the petals on the middle of the print supposed to fuse a little bit together, I found this as the best solution for the print to be more stable and not to wobble at the top of the print. I cut them apart easily with a scalpel and then started the deforming.
I used a 25 line wide brim to print the flower, adds additional stability.
Super glue the parts together as you see on the video.