Testors Model Paint Peg Board Holder / Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed thing:4558993 because it was the exact type of Testors paint rack I wanted only it did not offer any way to…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 458
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
I remixed thing:4558993 because it was the exact type of Testors paint rack I wanted only it did not offer any way to be mounted to a peg board which was what I really wanted. So I took the original file/STL and sliced it down in Fusion 360 to remove the original shelf bracket and added my own peg board mounting pegs to the back of it.
This turned out great and worked exactly as I had hoped! This should fit anyNormal Style peg board with little issue.
You may have to use your flush cutters to trim the bottom corner of the peg board hooks to get them to fit your exact peg board. I use a 3d printed peg board from Thingyerse and I just had to trim the very corner off each peg at about a 45 degree angle which allowed it to easily slide into my plastic peg board. If you have a normal wooden peg board though you shouldn't have to do this.
Lastly I cut down the length of the original paint holder from 7 or 8 slots to 5 slots as I felt it was too long for most peoples needs on a peg board.. Now if you need more you can just print more mounts and keep stacking them on your peg board like I did in my photos.
Print Settings
Printer Brand:
FlashForge
Printer:
Adventurer 5M Pro
Rafts:
No
Supports:
Yes
Resolution:
.20 OR .30 Depending on your nozzle size
Infill:
15% worked great for me
Filament: Sunlu PLA+ White
Notes:
Depending on the diameter of the holes in your peg board you may have to slightly trim off the corners of each peg stud for it to easily slide into your peg board at an angle.
If someone has an issue with fitment please leave a comment or message and I will try and get it fixed.Category: Art Tools