1 / 2
IKEA Micke cable hole reducer to Ø60mm / Redukce IKEA průchodky na Ø60mm — zdjęcie 1
1 / 2

IKEA Micke cable hole reducer to Ø60mm / Redukce IKEA průchodky na Ø60mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Solight plug required a tighter hole than the one on the IKEA table.

Ocena
0 / 5
Polubienia
1
Pobrania
26
Wydruki
0
Wyświetlenia
419
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

I bought the Solight table socket designed for the 60mm hole, which was much less than the standard hole in the IKEA table, so I printed a reducer.

The reducer fits very tight, I had to install it into the table using a hammer.

Printed from Prusament PLA with 0.15mm layer, 15% infill and 3 perimeters.

------------------------------------------------------------------------------------------------------------

Redukce průchodky v IKEA stole pro zapuštěnou zásuvku Solight.

Navrhl jsem to dost an těsno, takže jsem to do stolu musel natlouct kladivem.

Tagi