Rankhilfe/Climbing Aid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rankhilfe/Climbing Aid
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 144
- Wydruki
- 0
- Wyświetlenia
- 1294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
It's a climbing aid for plants, i made for a friend. The parts are connected with a M42x1 thread…maybe not the best solution, but worked fine for me :)
A little support ist needed for the part you push into your soil.
I would not suggest going above the average temperature, given by your filament.
Too high temperature (215°C for DasFilament PLA) caused a little deformation after printing the first thread and before printing the last thread. It still fits into each other though.
better go for 205°C (my first print was 205 and made no problems at all)
I was printing with 0.15mm layer height for threads and 0.25 for the rest.
I added a .3mf for the settings. Check if you like it, or slice it yourself :P
I also added a TEST.3mf for testing the threads. You can also just cut it yourself.
Have fun with it.